Click here to learn more about this liquidation sale. Don't miss out!
-10% EFI Master Fuel System Kit

This is the exact fuel system kit included with the self-regulated Sniper EFI System Master Kits but with a choice of fuel pumps.  It includes virtually everything most folks will need to convert their carbureted fuel system to an EFI fuel system adequate for the Sniper EFI System.  Also a great choice for self-regulated FiTech EFI kits (disable the FiTech PWM misfeature prior to using this kit.)  This kit is available with either 20 or 40 feet of Earl's Vapor-Guard EFI Fuel Hose.  20 feet is normally fully adequate if you are re-using your existing hard fuel line under the vehicle.  If you need to run both a feed and return then opt for the 40-foot hose.

This kit is recommended for pump or race gas use only. The included fuel pump is not compatible with E-85.

This kit includes:

  • Your Choice Of:
    • TI Automotive (Walbro) GSL396 Inline Fuel Pump (750 HP NA / 620 HP Boosted)*
    • TI Automotive (Walbro) GSL392 Inline Fuel Pump (590 HP NA / 500 HP Boosted)
    • TI Automotive (Walbro) GSL394 Inline Fuel Pump (450 HP NA / 370 HP Boosted)
  • Earl's Vapor-Guard EFI Fuel Line (Choose from 20 or 40 feet.)
  • EFI Fuel Clamps (13)
  • Pre Fuel Filter 20 micron
  • Post Fuel Filter 10 micron
  • -6 AN Female to Hosebarb Adapters (Straight)(4)
  • Return Fuel Bulkhead Port with Nut and Sealing Washers
  • Convoluted In-Tank Fuel Return Hose

If your EFI system is not self-regulated (as is the case with Sniper Stealth and all Sniper 2 and Terminator X systems) you will also need a fuel pressure regulator.  We recommend this great entry-level fuel pressure regulator (applications up to 450 HP).  For more options look here.

*Note: The four-injector Sniper and Terminator X Stealth can only support a maximum of 650 NA / 540 Boosted HP. Having more fuel system capacity than fuel injector capacity is not a bad thing but never attempt to produce more horsepower than the LESSER of your fuel injector or fuel system capabilities.

Note2: The 5/16-inch version is helpful when connecting to an OE fuel tank with 5/16-inch fittings.  However, We do not suggest using 5/16-inch hose with anything larger than the GSL394 Pump.  If you need more pump than that to fuel your engine then you'll want to use 3/8-inch fuel line.

The Mechanical Fuel Pump Block-Off Plate & Gasket is available separately.

Not Sure? Review this product documentation before you buy!

 
Installation Guide
Holley Sniper EFI Master Fuel System Kit

Fluid Fittings
Fittings IncludedYes
Inlet Size3/8 Inch Hosebarb
Return Size3/8 Inch Hosebarb
Fuel Pumps
Flow Rate (GPH)67 at 43.5 PSI, 62 at 60 PSI (13.5 Volts)
Flow Rate (LPH)255 at 43.5 PSI, 235 at 60 PSI (13.5 Volts)
Fuel SystemEFI
Fuel TypePump Gas/Race Gas
Fuel Filters
Element MaterialNon-Replaceable
Filter TypeOne Pre-Filter, One Post-Filter
Micron Filtration20 Micron Pre-Filter, 10 Micron Post-Filter
Mounting Bracket IncludedNo (Not generally required)
Outside Diameter2.16 Inch Diameter Post-Fiter; 1.94 Inch Pre-Filter
General
Also IncludedMechanical Fuel Pump Block-off Plate (Fits most Chrysler and Chevrolet applications)
ApplicationCarbureted vehicles switching to EFI system that includes pressure regulation
Emission Code3
OEM ReplacementNo
Unit of SaleKit

Write a review

Note: HTML is not translated!
    Bad           Good

EFI Master Fuel System Kit

  • Views: 34718
  • Brand: Holley EFI
  • Product Code: 526-5-392 | -394 | -396
  • Availability: In Stock
  • $434.00
  • $389.95

Available Options

Loading...