Instructional Videos RSS Feed

Holley EFI University - Instructional Videos from Holley

Check out these blockbuster movies featuring acclaimed Holley engineer Doug Flynn!

Holley Instructional Video: Holley Self Tuning Capability

Holley Instructional Video: Holley Self Tuning Capability

Chris Myer 05/29/15 1
  If you're like most people, just looking at all the numbers on a fuel map makes you dizzy--and the thought of adjusting them just a bit nauseous! In this demonstration, you'll watch a fuel map that has been virtually destroyed completely re-tune it...
Read More
Holley Instructional Video: Holley EFI Main Harness Overview

Holley Instructional Video: Holley EFI Main Harness Overview

Chris Myer 05/29/15 0
  Watch as Holley Engineer Doug Flynn walks through the various connectors on the Main Harness. Transcript: This is the main wiring harness for a Holley Avenger, HP, or Dominator system. This particular harness is for a four barrel TBI. All of the ha...
Read More
Holley Instructional Video: Proper Grounding Techniques

Holley Instructional Video: Proper Grounding Techniques

Chris Myer 05/29/15 0
  After the main ECU power and ground connections to the battery, the second most important wiring consideration is the grounding system. A "dirty" ground will introduce noise into the sensors, causing havoc in your Holley Fuel Injection System. This...
Read More
Holley Instructional Video: Wiring Techniques

Holley Instructional Video: Wiring Techniques

Chris Myer 05/29/15 0
  A super-interesting, super-useful guide to the right way to create solid wiring connections. Doug shows us the right connectors, the right crimpers, and how to use them to create rock-solid electrical connections. Transcript: Something I found when...
Read More
Holley Instructional Video: Creating Great Battery Connections

Holley Instructional Video: Creating Great Battery Connections

Chris Myer 05/29/15 1
  Avoid problems in your Holley Fuel Injection Kit installation by following Doug's advice on the most important connection in the whole system: the one from the ECU to the battery! Transcript: The battery of the vehicle is the best place by far to c...
Read More
Holley Instructional Video: Identifying 12-volt Power Sources

Holley Instructional Video: Identifying 12-volt Power Sources

Chris Myer 05/29/15 0
  Not as trivial as you think--especially on older cars! Transcript: One of the things your going to need to do when you're wiring fuel injection into a vehicle is find a switched ignition power source and possibly other sources for power. There are ...
Read More
Holley Instructional Video: Dual In-tank Pumps & Drop-In Fuel Modules

Holley Instructional Video: Dual In-tank Pumps & Drop-In Fuel Modules

Chris Myer 10/5/15 0
In this video, Alex Healey gives us an overview of the features of dual-pump kits and drop-in modules available from Holley.Transcript: Holley Performance fuel pumps and modules deliver maximum fuel flow through a wide pressure range to support major...
Read More
Holley Instructional Video: Programming the Holley Avenger ECU Using the Handheld Controller

Holley Instructional Video: Programming the Holley Avenger ECU Using the Handheld Controller

Chris Myer 05/29/15 1
  Think you can't program an ECU because you're all thumbs? If that's true then you're overqualified, because we're going to show you how you can do the whole job with one thumb in under 3 minutes! Transcript: Now that we have all of our hardware ins...
Read More
Holley Instructional Video: Introduction to the Holley Avenger Fuel Injection System

Holley Instructional Video: Introduction to the Holley Avenger Fuel Injection System

Chris Myer 05/29/15 0
  This short video gives a quick look at the benefits of the Avenger EFI ECU. Transcript: "My name is Doug Flynn, I am an engineer for Holley Performance Products, and I specialize in our fuel injection program. We are very proud to announce the rele...
Read More
Loading...