Want to perform sequential fuel injection on your big block Chevy but need a cam sync? If your block has a cam height that has been raised between 0.600 and 1.000 inches, this is your ticket.

Also available for camshafts with standard camshaft height and camshafts raised between .600 to 1.000 inches.

The included sensor bracket was designed to be installed in 1 of 5 positions along the perimeter of the cam drive cover using 2 of the cam cover’s 1/4-inch bolt-holes. To accommodate this feature, the sensor bracket’s slot and T-nut offers an additional 60° of angular adjustment about the upper cam pulley hub so that proper sensor-to-flying magnet target alignment may be achieved in all locations.

Cam Sync Kit Features:

• Fits Big Block Chevy Engines w/jesel and similar external, dry timing-belt, cam drive systems
• Designed to provide a plug-&-play cam position signal to Holley EFI systems; Also compatible with any EFI system which can read a digital, square-wave cam input signal
• Bracket assembly can be mounted in up to five locations to accommodate various cam-drive systems and front accessory drive configurations

Not Sure? Review this product documentation before you buy!

 
Installation Guide
Crank Trigger System for Small and Big Block Chevy