-10% 130 GPH Dominator In-Line Billet Fuel Pump

Designed for high-horsepower, nitrous and forced-induction engines. This is a dual-pump design in a single package providing you with two stages of fuel pump goodness. Rather than feed the rated HP at all times (heating the fuel without reason) the second pump only kicks in when required, reducing heat buildup and helping to prevent fuel foaming. The extra pump offers the peace of mind that you will always finish what you start! For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. Be aware that there is also a dual-inlet version of this pump, Holley PN 12-1200-2.

Holley engineers have designed 12-1200 to feature improved hot fuel handling capabilities. It was designed to greatly reduce the negative effects of heated fuel now common with many of today’s pump gas blends. It is available for use with pump gas or race gas. If you are using E-85 or diesel, no need to worry, Holley has still got you covered with the 12-1800 Dominator Fuel Pump. At only 5.1 lbs, they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!

These pumps do not have an internal bypass. A bypass style regulator and return line are required.

NOT FOR USE WITH METHANOL! Will not work with E-85 or Diesel!

What Fuel Pressure Regulator Will Work With This Pump?

While we have seen conflicting opinions about this, even within Holley's documentation, whenever using a fuel pump capable of feeding 800 HP or more we immediately recommend the Holley VR-Series EFI Fuel Pressure Regulator. While it is possible that a smaller regulator might work (that is, not be overwhelmed by the fuel flow this pump produces, leading to fuel pressure spikes) the modest difference in price is easily worth it for the peace of mind.

Not Sure? Review this product documentation before you buy!

 
Installation Guide
Holley Dominator Fuel Pump (160 and 200 GPH) Installation Guide

 
Holley Fuel System Primer
 

Fluid Fittings
Fittings IncludedNo
Inlet Size10 AN O-Ring - 7/8-14 SAE
Outlet Size10 AN O-Ring - 7/8-14 SAE
Fuel Pumps
Flow Rate (GPH)100 GPH (43 PSI), 88 GPH (60 PSI) - At 13.8 Volts
Flow Rate (LPH)379 LPH (43 PSI), 333 LPH (60 PSI) - At 13.8 Volts
Fuel SystemEFI
Fuel TypePump Gas or Race Gas (No E85 or Methanol)
General
ApplicationUniversal
OEM ReplacementNo
Unit of SaleEach

Write a review

Note: HTML is not translated!
    Bad           Good

130 GPH Dominator In-Line Billet Fuel Pump

  • Views: 9607
  • Brand: Holley
  • Product Code: 12-1200 | 12-1200-2
  • Availability: In Stock
  • $553.00
  • $496.95

Available Options

Loading...