This Hydramat is designed to fit on the 11mm inlet found on many Walbro / TI Automotive Fuel Pumps, including the following:
- GSS341 and GSS342 255 LPH pumps
- F20000312 and F20000313 255 LPH pumps
- F90000262 and F90000273 400 LPH Pumps
- F90000267 and F90000274 450LPH pumps
The fitting positions the Hydramat at 20 degrees to the pump, placing it horizontal if the pump itself is positioned to be angled almost flat at 20 degrees. If you need a hydramat for your Walbro / TI Automotive Fuel Pump that will allow you to install the pump vertically then consider the 16-111.
This Hydramat is a direct replacement for the Hydramat included with in the folllowing Holley OE-Style Fuel Tank Modules
- 67-69 Camaro and Firebird
- 70-73 Camaro and Firebird
- 74-81 Camaro and Firebird
- 64-67 Chevelle, Malibu, and El Camino
- 68-72 Chevelle, Malibu, and El Camino
Hydramat is compatible with all gasoline blends (Alcohol, Ethanol, Methanol, and E-85). Hydramt is not to be used with with oils, diesel fuels, or any other fluids. It acts as a fuel pump pre-filter, providing 15 microns of filtration capacity, so no filter is required between the Hydramat and the fuel pump. Hydramat cannot be cleaned, but should provide a life expectancy of between 5 and 10 years under normal use and with care to only use uncontaminated fuel.
Not Sure? Review this product documentation before you buy!
|11mm Female; Straight; Suited to Walbro / TI Automotive pumps with 11mm male inlet
|Universal. Alcohol, Ethanol, Methanol, and E-85 fuels. Works with 2-cycle oil blends as high as 20:1
|Unit of Sale