This Hydramat is designed to fit on the 11mm inlet found on many Walbro / TI Automotive Fuel Pumps, including the following:
- GSS341 and GSS342 255 LPH pumps
- F20000312 and F20000313 255 LPH pumps
- F90000262 and F90000273 400 LPH Pumps
- F90000267 and F90000274 450LPH pumps
The fitting positions the Hydramat at 90 degrees to the pump, placing it horizontal if the pump itself is positioned vertically. If you need a hydramat for your Walbro / TI Automotive Fuel Pump that will allow you to lay the pump at an angle then consider the 16-116.
Hydramat is compatible with all gasoline blends (Alcohol, Ethanol, Methanol, and E-85). Hydramt is not to be used with with oils, diesel fuels, or any other fluids. It acts as a fuel pump pre-filter, providing 15 microns of filtration capacity, so no filter is required between the Hydramat and the fuel pump. Hydramat cannot be cleaned, but should provide a life expectancy of between 5 and 10 years under normal use and with care to only use uncontaminated fuel.
Not Sure? Review this product documentation before you buy!
| Fluid Fittings | |
| Fittings Included | No |
| Outlet Size | 11mm Female; Straight; Suited to Walbro / TI Automotive pumps with 11mm male inlet |
| Fuel Filters | |
| Filter Type | Pre-Filter |
| Hydramat | |
| Connector Location | Center-Offset |
| Filtration Level | 15 Micron |
| Shape | Rectangle |
| General | |
| Application | Universal. Alcohol, Ethanol, Methanol, and E-85 fuels. Works with 2-cycle oil blends as high as 20:1 |
| Emission Code | 3 |
| Length | 15 Inches |
| OEM Replacement | No |
| Unit of Sale | Each |
| Width | 3 Inches |
