-10% EFI Fuel Tank System, 1981-1993 Dodge D100/D150 and W100/W150 Pickup

Perhaps you are already aware that Dodge decided to put a plastic fuel tank into your 1981-1993 Dodge D100/D150 or W100/W150 Pickup. The good news is that it lasted this long. The less-good news is that you REALLY need to replace it at this point if you've not already done so.

But the BEST news is that Holley now offers this all-steel fuel tank that is a direct replacement to the factory original tank in your D100/D150 Pickup. This steel-contruction tank is finished in a semi-gloss powder-coated finish for good looks and long life. It includes a new filler neck, clamps, hanger-straps and strap pads so you get everything you need for installation. The vent is pre-mounted right in the tank. Full Detailed Specifications Below!

Is this for carbureted or fuel injected engines?

We promote these as a EFI fuel tank system and they certainly are that. But they will work for your carbureted engine as well. Fuel Pump modules are sold separately and just bolt right into place. We offer three options above:

Pumps listed above all produce 340 LPH at free flow and are appropriate for naturally-aspirated applications making no more than 700 HP. If you have any question if this is enough fuel pump for you, it is our honor to be of assistance. Please contact us.

Which fuel level sender should I choose?

Hey, I'm all about saving money where I can. I do not necessarily believe that newer is better and I'm good at installing things and making them work. But even if that describes you too, let me tell you that the new Easy-Level LIDAR sender from is hands-down the better choice than the old-style float-arm sender. You're going to spend an hour getting that old-school sender installed and adjusted just the way you like it. And then you're going to wonder if it's working right. Or you can just bolt in the Easy-Level, use a couple of minutes to set some switch settings, and then ride in confidence that it's bang-on correct. Make the easy choice. :-)

What else am I going to need to be successful with this installation?

If your Dodge truck is a W-series 4 wheel drive version then you also need an additional mounting strap for 1981-1993 Dodge W100/W150 4WD trucks (available as a purchase option, above.)

Finally, you are going to need a fuel filter, fuel hose, clamps, and a couple of fittings. This kit offers everything you need in one package.

Not Sure? Review this product documentation before you buy!

 
Installation Guide
Dodge D-Series Truck 1981-1993 Fuel Tank*

*This installation guide was written for a kitted version of the Dodge D-Series Truck Fuel Tank that included the fuel level sender and the fuel pump. While that kit has not been produced the instructions themselves are excellent and will apply to this tank when installed with the recommended fuel pump and level sender.

 
Installation Guide
Holley Easy-Level LIDAR Sender

Fluid Fittings
Inlet Size1/4 NPT Female (On optional fuel pump module)
Outlet Size1/4 NPT Female (On optional fuel pump module)
Fuel Tanks
Capacity26 Gallons
Drain PlugNo
Fuel Pumps
Fuel SystemEFI or Carbureted
Fuel TypeGasoline (No E-85)
Fuel Filters
Filter TypeIn-Tank Sock Filter (On optional fuel pump module)
Sensors
RangeSwing-Arm Style Sender: 73-10 Ohms Easy-Level LIDAR Sender: User Selectable
TypeOptional Swing-Arm Rheostat or LIDAR (not included)
General
Also IncludedFiller Neck, Clamps, Hanging Straps, Strap Pads, and Vent
Application1991-1993 Dodge D100/D150 Pickup 1991-1993 Dodge W100/W150 Pickup
ColorBlack
Emission Code3 - This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.
Height15.8 Inches
Length50 Inches
MaterialPowdercoated Steel
Unit of SaleEach
Width15.8 Inches

Write a review

Note: HTML is not translated!
    Bad           Good

EFI Fuel Tank System, 1981-1993 Dodge D100/D150 and W100/W150 Pickup

  • Views: 6900
  • Brand: Sniper EFI
  • Product Code: 19-592
  • Availability: In Stock
  • $365.00
  • $327.95

Available Options

Loading...