Gauges

Gauges

UPDATE, November 2023: Holley has made the decision to discontinue these gauges. I don't know nor can I speculate why. I only know that I really like the set I have in my truck. Displays are cool but I'm still partial to a gauge. To each his own. I understand that Holley may be doing something that will allow the Classic Instruments line of gauges that they offer to operate with their EFI systems via the CAN bus. That would be kind of interesting, especially since Classic doesn't offer any digital gauges at this time (as far as I am aware.) Maybe they are building a digital-to-analog converter that creates signals for each gauge? Or introducing digitally-driven analog gauges? We'll see--check back here and as soon as something develops we'll add it to the website.


Just because you demand the most sophisticated electronic fuel injection technology available on the planet doesn't mean that you can't appreciate the subtle sophistication of a beautifully crafted analog gauge. In fact, purists know that while some information is well displayed in digits, other information is nearly worthless if you can't get a feel for the rate of change from the sweep of a needle.

If that paragraph describes you then your gauges have arrived.    Holley EFI's new Analog Display Gauges use digitally-delivered information over Holley's sophisticated CAN bus but use a traditional sweep display.  And while you can appreciate the beauty of nice analog gauge it is important to understand the additional benefits.

First, these all get their information from the Holley ECU, meaning that you don't have to run wires all over the vehicle to get the information you need.  You get everything from the ECU itself.

Second, because it uses Bus communication technology, all you have to do is run a single CAN bus harness to the ECU and then daisy-chain the gauges.  Did you ever think that installing gauges could be so easy?

And just take a look at that mounting system.  Remember the old style gauges where you had to fumble with a pair of tiny nuts up behind the dash to install the gauge?  Those days are gone and good riddance!  These gauges feature a threaded body that allows a single bezel nut to hold the gauge firmly in place.  Too easy.

Choose From:

  • 4-1/2 Inch Speedometer and Tachometer
    • Speedometer, CAN Bus (0-160 MPH)
    • Speedometer, GPS (0-160 MPH)
    • Tachometer (0-10K RPM)
    • Tachometer (0-8K RPM)
  • 3-3/8 Inch Speedometer and Tachometer
    • Speedometer, CAN Bus (0-160 MPH)
    • Speedometer, GPS (0-160 MPH)
    • Tachometer (0-10K RPM)
    • Tachometer (0-8K RPM)
  • 2-1/16 Inch Gauges (Include Standard Black Bezel, Daisy Chain Cable and Power Harness)
    • Voltage (0-18V)
    • Oil Pressure (0-100 PSI)
    • Coolant Temperature (120-260°)
    • Fuel Pressure (0-100 PSI)
    • Vacuum/Boost (30 inHG-30 PSI)
    • Air/Fuel Ratio Left (10:1-18:1)
    • Air/Fuel Ratio Right (10:1-18:1)
    • Fuel Level (E-F)
  • Required Accessories
    • CAN Bus Module (Required for first gauge only)
  • Optional Accessories
    • 8-Connection Gauge Power Harness
    • 3-Foot Power Harness Extension (3-Pack)
    • 6-Inch Daisy Chain Cable
    • 1-Foot Daisy Chain Cable
    • 3-Foot Daisy Chain Cable
    • 2-1/16 Inch Black Bezels (Standard, 3-Pack)
    • 2-1/16 Inch Black Bezels (Bold, 3-Pack)
    • 2-1/16 Inch Silver Bezels (Standard, 3-Pack)
    • 2-1/16 Inch Silver Bezels (Bold, 3-Pack)
    • 3-3/8 Inch Black Bezels (Standard, 2-Pack)
    • 3-3/8 Inch Black Bezels (Bold, 2-Pack)
    • 3-3/8 Inch Silver Bezels (Standard, 2-Pack)
    • 3-3/8 Inch Silver Bezels (Bold, 2-Pack)
    • 4-1/2 Inch Black Bezels (Standard, 2-Pack)
    • 4-1/2 Inch Black Bezels (Bold, 2-Pack)
    • 4-1/2 Inch Silver Bezels (Standard, 2-Pack)
    • 4-1/2 Inch Silver Bezels (Bold, 2-Pack)

    There are no products to list in this category.

    Loading...