Wouldn't it be nice to be able to leave the handheld controller connected on your Holley Sniper or Terminator X EFI System while you connect your Laptop via the CAN Bus to USB Adapter Cable?  Well now you can!  Plug this Y-Harness into the CAN bus connector on your system and, like magic, you now have a connector for both devices.  Connect, display, and interact with both devices simultaneously.

This Y-Cable is available in 6 inches or 4 feet long. We also offer CAN bus extension cables for the Holley Sniper and Terminator X EFI Systems. Available starting at 4 feet long.

Harness features automotive-grade insulation.  Rated to 125 Degrees C (257 Degrees F). Finished with Molex® Mizu-P25™ Series 4-position connectors.

While this will work perfectly with both Sniper and Terminator X EFI Systems, realize that the Terminator X comes with two of the Mizu P-25 connectors on the main harness.  So unless you need three connectors (which is possible) or unless you're trying to extend two connectors to a different location, this splitter may not be necessary on the Terminator X.

IMPORTANT NOTE ABOUT UPDATING FIRMWARE:  When updating firmware with the Y-Cable attached it is important that only one device be connected.  Do not update firmware with more than one device connected to the CAN bus.