-10% Hall Effect Sensor (Crank Trigger Wheel)

This sensor is designed to trigger from a ferrous metal (magnetic steel) target, such as Holley’s 60-2 crank trigger wheels. It can also be used for a cam sensor trigger and other applications. It can be powered with a 5-20 Volt source. When making the “target” piece to trigger the sensor, the bigger the better, especially if high RPM is involved. If using a bolt head, etc. for a cam trigger, it is advised to use something with a diameter of at least 1/4 inch. The gap should be as close as possible, without contact. Shoot for .020”-.040” as a target.

The following is the wiring pinout:

PinColorChannel
AOrangePower
BBlueSignal
CBlackGround (use “IPU Ground” on Holley)
Sensors
Harness Pigtail IncludedYes
TypeHall Effect (Steel Crank Trigger Wheel)
General
ApplicationUniversal w/steel crank-mounted trigger wheel
Emission Code3
Unit of SaleEach

Write a review

Note: HTML is not translated!
    Bad           Good

Hall Effect Sensor (Crank Trigger Wheel)

  • Views: 20669
  • Brand: Holley EFI
  • Product Code: 554-117
  • Availability: In Stock
  • $149.00
  • $133.95
Loading...