This 8-Channel Exhaust Gas Temperature (EGT) Kit allows you to sense exhaust temperatures from 32-degrees to 2282-degrees Fahrenheit (0-1250 Degrees Celsius.) Work with the Holley HP and Dominator ECU or any other ECU or data-logger that can accept 5-volt analog voltage temperature sensor inputs.
Wiring this up with your HP or Dominator ECU couldn't be easier. The included Type-K Thermocouples plug into the kit's master harness. Then, you simply connect the CAN bus connector to the main harness of your HP or Dominator ECU. You're done! The Can bus supplies the voltage and ground to the kit's controller module. (Additional wires are included to support connection via analog outputs to devices that are not equipped with the Holley CAN bus.)
Nothing beats precise exhaust temperature reading of each cylinder to know exactly what is going on in your engine. This kit provided the needed information to perform fuel adjustment at the cylinder level. Includes:
- 8-Channel EGT Module, Powered via CAN Bus connection
- EGT Module Main Harness with EGT Probe Connectors
- 1/4-Inch 90-Degree EGT Probe (8)
- CAN Harness Extension (4-foot)
- Stainless Steel Weld Bungs (8)
Not Sure? Review this product documentation before you buy!
| Sensors | |
| Range | 32-degrees to 2282-degrees Fahrenheit (0-1250 Degrees Celsius) |
| Type | Exhaust Gas Sensor (EGT) 8-Channel |
| General | |
| Emission Code | 4 |
| Unit of Sale | Kit |
