-11% Terminator LS Multi-Point Fuel Injection System

Get all the great features of Terminator self-tuning EFI in a plug-and-play system for GM’s popular '97-'07 Truck engines! These EFI systems are all designed to be click-connect with the factory sensors, ignition, and injectors.  Swap in the included Wideband O2 sensor, connect the sensors, coil harnesses, and ignition harness, then run the super-easy setup wizard on the included 3.5-inch handheld.  Turn the key, start and drive.  From that point forward the ECU and wideband O2 sensor work in concert to refine the base fuel map so that the tune just gets better and better.  No programming, no elaborate wiring, no laptop required!

That's All You Have To Do...But Not All You Can Do!

Once you're up and running the sky is the limit. Boost control, nitrous control, custom I/O configurations. You can control most features using nothing more than the included 3.5-inch handheld display. Do you want a bigger display? Those are available too--including Holley's 12.3-in Pro Dash. Are you more comfortable using a laptop for tuning and configuration? Holley's EFI Software is industry-leading in both it's ease of use and capability.

Which Terminator LS MPFI System Is Right For Me?

Holley has made it easy to get just the right system for your specific requirements. That means you aren't getting some universal-fit kit that requires a bunch of configuration but rather exactly the right system for you. Whether you need to to control a 4L60E/80E transmission or drive-by-wire throttle bodies (or both) there is a system specific to your engine and need.

NOTE: Items with strike-through have been discontinued.  Contact Us for other options.

Part NumberEngineTrans
Control
DBW
Control
Injector
Harness
550-608GM LS1 / LS6
(w/ 24-tooth Crank Reluctor)
NNJetronic
(Bosch)
550-609GM LS1 / LS6
(w/ 24-tooth Crank Reluctor)
YNJetronic
(Bosch)
550-610GM LS2 / LS3 and
GM 4.8 / 5.3 / 6.0 Truck Engine 07+
(w/ 58-tooth Crank Reluctor)
NNUSCAR
(EV6)
550-611GM LS2 / LS3 and
GM 4.8 / 5.3 / 6.0 Truck Engine 07+
(w/ 58-tooth Crank Reluctor)
NYUSCAR
(EV6)
550-612GM LS2 / LS3 and
GM 4.8 / 5.3 / 6.0 Truck Engine 07+
(w/ 58-tooth Crank Reluctor)
YNUSCAR
(EV6)
550-613GM LS2 / LS3 and
GM 4.8 / 5.3 / 6.0 Truck Engine 07+
(w/ 58-tooth Crank Reluctor)
YYUSCAR
(EV6)
550-614GM 4.8 / 5.3 / 6.0 Truck Engine 97-07
(w/ 24-tooth Crank Reluctor)
NNMultec 2
550-615GM 4.8 / 5.3 / 6.0 Truck Engine 97-07
(w/ 24-tooth Crank Reluctor)
NYMultec 2
550-622GM 4.8 / 5.3 / 6.0 Truck Engine 97-07
(w/ 24-tooth Crank Reluctor)
YNMultec 2
550-623GM 4.8 / 5.3 / 6.0 Truck Engine 97-07
(w/ 24-tooth Crank Reluctor)
YYMultec 2

*Note: Mid-Year change on '07 Truck Engines!  Identify crank wheel as follows:

  • Engines with 24-tooth wheels will have a BLACK crank sensor connector on the engine
  • Engines with 58-tooth wheels will have a GRAY crank sensor connector on the engine

What If I Need A Different Injector Harness?

Contact us. We're generally able to accommodate customizations with no problem!

This Is More Expensive than Terminator X. What's The Difference?

You're right--the Terminator LS systems are more expensive than the Terminator X and Terminator X-Max systems for the LS engines. But for all of their similarities these are quite different systems in terms of capability.

Both are intended to be plug-and-play EFI Systems for the GM LS and truck engines. Both offer versions for users needing to control fuel/spark only, or electronic transmission control, or Drive-By-Wire control (or both.) But the Terminator X family is intended to be a more budget-friendly solution and, as a result, gives up some of the more advanced features of the Terminator.

The Terminator systems available on this page feature either Holley's HP ECU (those that do fuel and spark control without transmission or DBW control) or Holley's Dominator ECU (those that do transmission and/or DBW control.) These ECUs have features that make them competitive with the best aftermarket ECUs the industry has to offer.  Plus, the HP and Dominator ECUs in the Terminator LS MPFI Systems have world-renowned hardness features that make them nearly bullet-proof in harsh environments.

Bottom line: If you don't need the extra features, if the battle-ready case and potting are not necessary for the environment you are in, then you might be better off with the Terminator X LS or Terminator X-Max LS. Download and browse the comparison chart below. References to "HP" and "Dominator" are the ECU's included with these Terminator LS systems. The Terminator X and Terminator X-Max ECU's are so-listed.

Not Sure? Review this product documentation before you buy!

 
Owners Manual
Holley Terminator LS MPFI Fuel Injection System

 
Comparison Chart
Holley Terminator vs. Terminator X Series

ECU
Boost ControlYes (Addtional Hardware Required)
DIS OutputsEight (Standard Terminator) or Twelve (Terminator w/Trans and/or DBW Control)
FamilyTerminator
Fueling StrategySpeed Density, Alpha-N, or Combination
Includes Power HarnessYes
Injector DriversEight (Standard Terminator) or Twelve (Terminator w/Trans and/or DBW Control)
Internal Datalogging4GB
Nitrous ControlYes (Addtional Hardware Required)
Number of Cylinders8
User Configurable I/OYes
User-Selectable MAP StorageTerminator w/Trans and/or DBW Control only
Water-Methanol ControlYes (Addtional Hardware Required)
Displays And Controllers
Auto BrightnessNo
CAN Bus CapableYes (Specific to Holley ECUs Only)
Case/Bezel FinishBlack
ConfigurableMonitor dozens of pre-configured metrics provided by the ECU, including sensors, air/fuel ratio, switched outputs, drive-by-wire data, and more.
Data LoggingYes
Display TypeLCD
FunctionsSetup, Monitor, Tuning
Gauge/Display Size3.5 Inch Rectangular
Internal StorageYes (SD Card)
TouchscreenYes
Harnesses
Harness TypePower Harness, Main Harness, Injector I/O Harness, DBW Harness (DBW models only), Transmission Harness (Transmission Control models only)
TerminatedYes
Crank Timing
Sensor Harness IncludedYes
Sensors
TypeWideband O2 (Bosch); Uses the following LS engine sensors: Oil Pressure, Coolant Temperature Sensor, Manifold Air Temperature, Cam Sensor, Crank Sensor, Knock Sensor, MAP Sensor, Throttle Position Sensor. Uses LS engine's Idle Air Control. Fuel Pressure Sensor optional, not included
General
Also Included40-Amp Relay.
ApplicationGM LS1 and LS6 Engines (24-Tooth CR) GM LS2 and LS3 Engines (58-Tooth CR) GM 4.8, 5.3, and 6.0 Liter Truck Engines '97-'07 (24-Tooth CR) GM 4.8, 5.3, and 6.0 Liter Truck Engines '07+ (58-Tooth CR)
Emission Code3
Unit of SaleKit

Write a review

Note: HTML is not translated!
    Bad           Good

Terminator LS Multi-Point Fuel Injection System

  • Views: 29012
  • Brand: Holley EFI
  • Product Code: 550-613 | 550-614 | 550-615
  • Availability: In Stock
  • $3,617.95
  • $3,215.95

Available Options

Loading...